부품 정보
Groove 0.026 diameter 0.089 from smallend and drive slot 0.055/0.065 deep x 0.055/0.065 wide large end and 0.010/0.040 x 45 degrees chamfer each end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat fillister
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.370 inches and 0.380 inches
Offset Distance Between Geometric Center Of Head And Centerline Of Shank/shoulder:
Between 0.041 inches and 0.051 inches
First Step Diameter:
Between 0.3116 inches and 0.3120 inches
First Step Length:
0.197 inches
Second Step Diameter:
Between 0.1592 inches and 0.1596 inches
Second Step Length:
Between 0.183 inches and 0.193 inches
MRC:
The number that designates the enlarged portion of the shank whose centerline is not collinear with the centerline of the head of an item.ACHW
Numeric Designation Of Step Eccentric To Head:
1
Pin Head Diameter:
Between 0.3116 inches and 0.3120 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches head bearing surface
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.197 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Eccentric
