부품 정보
Multitrace delay; save; auto erase; 4cm/ns writing rate; 4 plug-in compartments; 700 ps single-shot risetime storage; 500 mhz bandwidth; 500 ps/divcalibrated sweep rate; bnc connector; calibrator output 40 mv, 0.4v, 4v into100 kohms; 4mv, 40mv, 0.4v into 50 ohms
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
24.700 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
13.600 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
12.000 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
Between 48.0 hertz and 440.0 hertz
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
Between 90.0 volts and 250.0 volts
MRC:
The interval/s/ as indicated by the markings on the item.AWEC
Graduation Interval:
Graduated in 0.9 cm/div full scan; 0.45 cm/div reduced span
MRC:
Designates the relative or proportionate dimensions of the screen.BGQK
Screen Size:
8 by 10 div, 0.9 cm/div
MRC:
An indication of whether or not sweep circuits are included.BGQL
Sweep Circuits:
Included
MRC:
Indicates the type of sweep circuits provided.BGQN
Sweep Circuit Type:
Horizontal and vertical
MRC:
An indication of whether or not an input intensity modulation feature is provided.BHDH
Input Intensity Modulation Feature:
Provided
MRC:
The value,or range of values,at which the visual blanking sensitivity is rated to respond.BHDK
Visual Blanking Sensitivity Voltage Rating:
15.0 volts
MRC:
The minimum and maximum frequencies to which the y-axis will respond.BHDR
Y-axis Frequency Response Rating:
500.0 megahertz
MRC:
An indication of the shape of the amplitude calibrating voltage waveform.BHDZ
Amplitude Calibrating Voltage Waveform:
Square wave
MRC:
The peak to peak value for which the item is calibrated.BHFB
Calibrating Peak To Peak Amplitude:
Between 2.0 volts and 2.0 volts
MRC:
An indication of whether or not a calibrated screen scale is included.BHFF
Calibrated Screen Scale:
Included
MRC:
An indication of whether or not a trace storage tube is included.BHFH
Trace Storage Tube:
Included
MRC:
An indication of whether or not camera recording device accommodations are provided.BHFT
Camera Recording Device Accommodation:
Provided
