TXT
묘사:
Plug-in Electronic Compon Socket
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Plastic
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Top mount w/retainer ring groove
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Molded
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.844 inches
MRC:
A measurement taken at right angles to the length of the mounting slot,in distinction from thickness.ABTD
Mounting Slot Width:
Any acceptable
Body Mounting Hole Accommodation Diameter:
1.156 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
1.250 inches
MRC:
The distance between mounting facility centers.AEJN
Distance Between Mounting Facility Centers:
1.359 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the mounting hole(s).AEVB
Mounting Hole Style:
Round, w/two mounting slots
MRC:
The name of the equipment the item is specifically designed to accommodate.AFJE
Specific Equipment Accommodated:
Electron tube
MRC:
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.AFRC
Contact Maximum Current Rating In Amps:
5.0
MRC:
The element,compound,or mixture of which the contact/s/ is fabricated,excluding any surface treatment.AFRG
Contact Material:
Phosphor bronze
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the contact surface.AFRH
Contact Surface Treatment:
Silver
MRC:
The number of contacts accommodated by the item.AFRL
Accommodated Contact Quantity:
6
MRC:
Indicates the type of polarization used to prevent mismating.AKWN
Polarization Type:
Center key hole
MRC:
The element,compound,or mixture of which the saddle is fabricated,excluding any surface treatment.AKWW
Saddle Material:
Steel
Projection Length Below Mounting Surface:
Any acceptable
MRC:
The means of attaching the item.AXGY
Mounting Method:
Retainer ring
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Chassis
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Component retaining device
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact positions.CRPY
Contact Position Arrangement Style:
Circular
MRC:
The maximum potential,expressed in volts,and the current type that may be applied continuously to the contacts without damage.CSKW
Contact Maximum Voltage In Volts And Current Type:
1250.0 ac and 1250.0 ac
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
Contact surfaces silver
MRC:
An indication of the precious material contained in the item,and the amount per a measurement scale.PMWT
Precious Material And Weight:
0.030 silver grains, troy
MRC:
Identification of the precious material contained in the item.PRMT
Precious Material:
Silver
MRC:
Indicates the type and number of terminals for providing electrical connection.TTQY
Terminal Type And Quantity:
6 tab, solder lug
