MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Square or rectangular recess
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
18.380 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.750 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, rounded corners, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
20.750 inches
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
18.250 inches
MRC:
A measurement of the longest inside dimension of an item,in distinction from width.ADJU
Inside Length:
15.880 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.250 inches
Hole Quantity Along Length:
8
Hole Quantity Along Width:
10
Distance Between Holes Along Length:
4.000 inches and 4.000 inches and 3.620 inches and 4.000 inches and 4.000 inches
Distance Between Holes Along Width:
4.000 inches and 4.620 inches and 4.630 inches and 4.000 inches
Distance From First Hole Centerline To End Along Length:
0.560 inches
Distance From First Hole Centerline To End Along Width:
0.560 inches
First Recess Inside Height:
7.300 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.380 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
Inside Angle:
3.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
00-a-601, alloy 356-t-7 federal specification single material response
