MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.406 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 1.922 inches and 1.952 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 2.485 inches and 2.515 inches
Distance Between Holes Along Length:
Between 1.807 inches and 1.817 inches
Distance Between Holes Along Width:
Between 1.245 inches and 1.255 inches
Distance From First Hole Centerline To End Along Length:
Between 0.329 inches and 0.359 inches
Distance From First Hole Centerline To End Along Width:
Between 0.329 inches and 0.359 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.500 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-631, fs1015 to 1025 federal specification single material response or qq-s-634, fs1015 to 1025 federal specification single material response or qq-s-637; comp 1213, 1215, b1112 or b1113 federal specification single material response
