부품 정보
198 degrees scale beginning 9 degrees below horizontal center; scale name amine, drain and vent tank
TXT
묘사:
Float Type Liquid Quantity Gage
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.AAMA
Mounting Hole Diameter:
0.312 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.AAMW
Flange Diameter:
5.250 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
22.125 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
6
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
5.250 inches
MRC:
Indicates the designed use of the item.ALCD
Usage Design:
W/us nav submarine liquid level system
MRC:
Indicates the type of device used to register the condition(s).AMKD
Indicator Type:
Dial
MRC:
An indication of the manner in which the scale is calibrated.AMNK
Scale Calibration:
Empty, 1/4, 1/2, 3/4, full
MRC:
Indicates the type of scale.ATEQ
Scale Type:
Movable
MRC:
The smallest value between the markings on a scale.AWAG
Scale Smallest Increment:
0.062 tank
MRC:
The means of attaching the item.AXGY
Mounting Method:
Flange and hole
MRC:
The element,compound,or mixture of which the float is fabricated,excluding any surface treatment.BJDM
Float Material:
Steel, stainless
MRC:
An indication of whether or not a protective float case is provided.BJDN
Float Protective Case:
Not provided
MRC:
An indication of whether or not a guide wire(s) is provided.BJDP
Float Guide Wire:
Not provided
MRC:
An indication of whether or not an oil seal is provided.BJDS
Oil Seal:
Not provided
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
