부품 정보
Mtg holes diameter 0.279 to 0.285 in. & are csk 100 degrees porm 0.500 in. To diameter 0.380 to 0.396 in. Near side & cbored 0.500 to 0.510 in. Dia, 0.250 in. Minus 0.005 in. Dp far side; markings-"access panel torque fasteners to 25-30 in. Lbs." and triangular sign-"warning"
TXT
묘사:
Weapon System Access Door
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
6.670 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
10.900 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
Between 0.380 inches and 0.430 inches
Hole Quantity Along Length:
6
Hole Quantity Along Width:
3
Distance From First Hole Centerline To End Along Width:
Between 0.420 inches and 0.444 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.100 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
An/alq-131
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Special marking
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize and primer and paint
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type i, cl 1 military specification 1st treatment response and mil-p-23377, type i military specification 2nd treatment response or mil-p-23377, type i, per mil-c-22751 military specification 2nd treatment response and pds23962 mfr ref 3rd treatment response
