TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat fillister
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.123 inches and 0.124 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 0.484 inches and 0.486 inches
Undercut Diameter:
Between 0.1155 inches and 0.1185 inches
Under Head Length:
0.550 inches
Undercut Width:
Between 0.012 inches and 0.014 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Drilled through head
First Hole Diameter:
Between 0.078 inches and 0.109 inches
Distance From Centerline Of Hole To End Of Pin:
Between 0.078 inches and 0.109 inches
First End Taper Length:
0.016 inches
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
Between 0.172 inches and 0.203 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.170 inches and 0.180 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 360
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
