부품 정보
Mounting holes countersunk 100.0 degrees to a diameter of 0.390 in.
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 4.930 inches and 4.950 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.135 inches and 0.140 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.199 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
5
MRC:
A measurement of the center to center distance between the mounting holes along the length.ADFY
Center To Center Distance Between Mounting Holes Along Length:
1.031 inches
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Not rated
MRC:
An indication of whether or not a reversible feature is included.AJNC
Reversible Feature:
Not included
MRC:
An indication of whether or not a hinge pin is included.AKEW
Hinge Pin:
Not included
MRC:
The number of cylindrical projections through which an axis or pin passes.AKEX
Knuckle Quantity:
3
Knuckle Length:
Between 0.975 inches and 0.980 inches
End Knuckle Length:
Between 0.975 inches and 0.980 inches
Pin Center To Body Edge Distance:
1.250 inches
Knuckle Inside Diameter:
Between 0.213 inches and 0.218 inches
MRC:
Indicates the type of cylindrical projection through which an axis or pin passes.AKNB
Knuckle Type:
Friction
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, corrosion resisting, ams 5643, class 17-4, cond a
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Passivated, mil-f-14072, finish e300
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Butt parallel holes
