부품 정보
Square flange left end 2.000 in. With 4 equallyspaced 0.159 in. Diameter holes on 2.375 in. Diameter bolt circle, one hole each corner; cut in two pieces 0.062 in. Wide 1.000 in. Center to corners; three coats epoxy-polyamide, first coat formula 150 3 to 4 military thick, second formula 155 2 to 3 military thick, third formula 151 2 to 3 military thick
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.6800 inches and 1.7000 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 1.9700 inches and 1.9900 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 1.7530 inches and 1.7730 inches
Right Internal Flange Hole Diameter:
Between 1.6300 inches and 1.6500 inches
Right Internal Flange Width:
Between 0.0630 inches and 0.0680 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square all corners
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Plastic epoxy left end surface of body and flange and plastic polyamide left end surface of body and flange
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Plastic epoxy outside diameter surface of flange and plastic polyamide outside diameter surface of flange
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-p-24441, formula 150, 151, 155 military specification single treatment response left end surface of body and flange
