부품 번호 75A430745-2001

Sleeve Bushing

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 426.92 and 576.342 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
75a430745-2001
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
011762487

부품 정보
Right inside surface of body counterbored 0.3290 in. Dia, 0.4760 in. Deep; eight sided, irregularlyshaped flange, 1.525 in. O/a height, 0.850 in. O/a width

NSN
국가 주식 번호:
3120-01-176-2487 3120011762487
TXT
묘사:
Sleeve Bushing
INC
INC
아이템 이름 코드:
13206
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.2031 inches first and 0.2091 inches first
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.2000 inches and 1.2100 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 0.2190 inches and 0.2200 inches
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
0.2550 inches
MRC:
None.AJFM
End To Flange Distance:
Between 0.2050 inches and 0.2150 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round center flange left body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square center flange outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square center flange outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square center flange right body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches internal surfaces
MRC:
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.CTJM
Antirotation/lubrication Type And Quantity:
2 hole
MRC:
Indicates the location and number of grooves on the surface of the item.CTMQ
Surface Groove Location And Quantity:
1 external
MRC:
None.CTSN
Left End Body Diameter:
Between 0.3400 inches and 0.3500 inches
MRC:
None.CTTG
Right End Body Diameter:
Between 0.7350 inches and 0.7360 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 7075
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/9, cond. T7351 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Ps 13201, type 2, class 1, fscm 76301 mfr ref 1st treatment response and ps 13208, fscm 76301 mfr ref 2nd treatment response
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
76301-ps21201, class a standard (includes industry or association standards, individual manufactureer standards, etc.).

{lang[cimilar]} Sleeve Bushings

« Bearings Plain Unmounted {lang[catalog]}
지금 비교»
맑다 | 숨기다