TXT
묘사:
Manual Control Handle
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.625 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft accommodation.ABHH
Shaft Accommodation Style:
Threaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
13.375 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.188 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Threaded shaft accommodation
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
24
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.313 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Handle has outside length of 3.875 in. And inside length of 3.500 in.; entire handle is l-shaped w/thrd end; both ends are chamfered 0.063 in. X 45.0 deg; has slot 1.063 in. Long beginning 4.906 in. From threaded end which is 0.125 in. Wide and 0.062 in. Deep rtyp; threaded end has 0.281 in. Diameter with 18.0 degrees flatened area, u/o m28 linker delinker mfg 26031; pkg nom. O/a length/type-15.000 in. Shipping cont., pkg nom. O/a width/type-4.000 in. Shipping cont., pkg nom. O/a height/type-05000 in. Shipping cont., gross wt-0.800 shipping cont. Lbs, quantity per shiping cont.-1
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1018 or steel comp 1020
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astma-108 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Tubular
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
