MRC:
Indicates the type of hole/s/ in the tongue.AAAL
Tongue Hole Type:
Oblong and round, unthreaded
MRC:
The environmental elements or conditions that the cushioning is designed or protected to resist or withstand satisfactorily.AAAP
Cushioning Environmental Protection:
Oil resistant and heat
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.000 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.531 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.050 inches
Center To Center Distance Between Loop And Mounting Hole:
1.438 inches
Distance From Loop Center To Tongue End:
1.938 inches
MRC:
The length of a straight line which passes through the center of the loop,and terminates at the inside circumference.BZTN
Loop Inside Diameter:
1.625 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber chloroprene class cr cushion
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel band or steel comp 1008 band or steel comp 1009 band or steel comp 1010 band or steel comp 1011 band or steel comp 1012 band or steel comp 1013 band or steel uns k31545 band or steel comp 1015 band or steel comp 1016 band or steel comp 1017 band or steel comp 1018 band or steel comp 1019 band or steel comp 1020 band
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm-d2000 sc-515 k1 assn standard single material response cushion
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium band and chromate band or zinc band and chromate band
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416 type 2 cl 3 federal specification 1st treatment response band or astm b633 type 2 cl fe/zn5 assn standard 2nd treatment response band
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Single loop
