부품 정보
Spring, shutoff valve
TXT
묘사:
Compression Helical Spring
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end, squared and ground both ends
MRC:
The length of a straight line which passes through the center of the stock,and terminates at the circumference.ACVU
Stock Diameter:
0.118 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
B-52 g/h
MRC:
The number of coils included on the item.APCN
Coil Quantity:
7.5
Spring Solid Length:
0.890 inches
Spring Solid Outside Diameter:
0.890 centimeters
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Left-hand or right-hand
Spring Free Outside Diameter:
0.820 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Heat treat 550 degrees f for 1 hour after forming per mil-h-6875; mx load 80 +/- 8 lbs at .92 length, min check load 24 +/- 2.5 lbs at 1.30 length
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-6101 military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium and chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416 type ii class 2 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
