부품 정보
Internal thread on second end is 1/4-28nf-3;
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Unthreaded cross drilled
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Square (round corners)
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.250 inches
Second End Width Across Flats:
Between 0.435 inches and 0.437 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.6220 inches and 0.6240 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
Between 0.3120 inches and 0.3140 inches
First End Distance From Hole Center To End:
Between 0.458 inches and 0.478 inches
MRC:
A measurement between specified points of the hole at the first end,in distinction from height.AMEB
First End Hole Depth:
Between 0.622 inches and 0.624 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.6692 inches and 0.6695 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
6
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
0.8125 inches
Second End Step Length:
Between 0.875 inches and 0.937 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1020 or steel comp 1030
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-633 federal specification all material responses
