부품 정보
Lashing strap connector
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.000 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.750 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.250 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.531 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
1
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Counterbored and threaded
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Los angeles class ss (688) ; lifting mechanism
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Item is made by investment casting process and is roughly y-shaped with top arms 1.250h x 1.250w; bottom leg is 0.500h x 1.250w tapering 14 degrees to bottom edge; mounting hole is centered in top of crossbar and is drilled 0.531 through then reamed to 0.791-0.814 for 1.000 inch and threaded .875-14unf-2b, 0.62 (min) full thd; each arm has a 0.510 horizontal hole drilled through from the side then reamed 0.630 x 90 degrees and counterbored 1.000 inch
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a743, grade cf-8 assn standard single material response
