부품 정보
Nylon end; hex facility; 75 gpm 3 psi valve; filtration rating 149.0 microns, absolute
TXT
묘사:
Fluid Filter Element
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
5.063 inches
MRC:
The direction in which the fluid is passed through the item.ADNK
Flow Direction:
Outside in
MRC:
The amount of surface area of the filtering material through which the fluid flows.ADNL
Filtering Surface Area:
2.78 square feet
MRC:
The amount of pressure loss in the system,due to the resistance of flow through the item.ADNP
Drop Pressure:
0.2 pounds per square inch
MRC:
The length of a straight line which passes through the center of the wire,and terminates at the circumference.AGCW
Wire Diameter:
0.005 inches
MRC:
A numeric value which represents the number of openings per lineal inch.AKSX
Mesh Size:
100.0
MRC:
Indicates the design type of the item.APGF
Design Type:
Limited
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the body.AZTL
Bodylength:
12.500 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
By-pass valve
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
2.500 inches
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Mesh single filtering media response
MRC:
The filtering system for which the item is designed to be used.CXZX
Filtering System For Which Designed:
Full flow
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel filtering medium
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Fuel/oil, hydrocarbon
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Sump type
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Npt
