TXT
묘사:
Fluid Passage Bolt
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Relieved
Concentric Hole Depth:
0.857 inches
Concentric Hole Diameter:
0.125 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.397 inches
MRC:
A narrative description of the type of end connection.ACKM
First End Connection Type:
Threaded external boss
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ACKN
First End Style Designator:
External seat for gasket seal (boss)
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.562 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
0.133 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Hexagon
First Diameter From Wrenching Feature:
0.420 inches
Second Diameter From Wrenching Feature:
0.310 inches
Third Diameter From Wrenching Feature:
0.420 inches
Fourth Diameter From Wrenching Feature:
0.310 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
0.099 inches
Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter:
0.340 inches
Length From Bearing Surface Of Wrenching Feature To End Of Third Diameter:
0.534 inches
Length From Bearing Surface Of Wrenching Feature To End Of Fourth Diameter:
0.734 inches
First Radial Fluid Hole Diameter:
0.125 inches
Distance From First Radial Hole Center To End Of Bolt:
0.806 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
1.297 inches
Wrenching Feature Height:
0.100 inches
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unjf
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.312 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium alloy, mil-t-9047, ty iii, comp a
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6931 assn standard 1st material response and ams 4928q assn standard 2nd material response
