MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.565 inches and 0.570 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.970 inches
MRC:
The measurement from one flat surface of the key to the opposite flat surface.ABLJ
Internal Straight Key Width:
Between 0.110 inches and 0.120 inches
Distance From Centerline To Inside Of Prebent Key:
0.530 inches
MRC:
The number of internal keys included.ABMR
Internal Key Quantity:
2
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.100 inches
Distance From Key Center To Wire Hole Center:
0.120 inches
Wire Hole Diameter:
Between 0.062 inches and 0.067 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 7075
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/9, temper t73 federal specification single material response or qq-a-225/9, temper t7351 federal specification single material response or qq-a-250/12, temper o federal specification single material response or qq-a-250/12, temper t6 federal specification single material response or qq-a-250/12, temper t651 federal specification single material response or qq-a-200/11, temper t73 federal specification single material response or qq-a-200/11, temper t73510 federal specification single material response or qq-a-200/11, temper t73511 federal specification single material response
Distance From Centerline To End Of Key:
0.750 inches
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
