MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.820 inches single conductor
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
0.130 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
0.820 inches
MRC:
Indicates the type of facility provided on the device for attaching to another item.AKRZ
Termination Type:
Lug terminal w/mounting hole both ends single conductor
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the lead.AXBQ
Leadlength:
14.880 inches
MRC:
The number of strands per conductor.BLNZ
Strand Quantity Per Conductor:
1056 single conductor
MRC:
The fabricated form of the conductor.CXCW
Conductor Form:
Braid, flat single conductor
MRC:
The designation used to describe the round stranded or round solid conductor size.CXDC
Round Conductor Size:
0 awg single conductor
MRC:
The american wire gage size of the individual strands of wire used in each stranded conductor.CXDG
Strand Awg Size Per Conductor:
30 single conductor
MRC:
Designates the size of the mounting aperture provided in the terminal lug.CXFM
Terminal Lug Aperture Size:
0.410 inches 1st end single conductor
MRC:
Designates the size of the mounting aperture provided in the terminal lug.CXFM
Terminal Lug Aperture Size:
0.470 inches 2nd end single conductor
MRC:
The pulling force which the item is capable of withstanding without any permanent deformation or damage.CXHH
Lead Pull Strength:
100.0 pounds
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper core conductor single conductor
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81348-j-l-231 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
1 type and 2 style
