부품 번호 7400046

Headless Grooved Pin

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards
부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
7400046
비무장화:
No
수명:
측정 단위:
NIIN:
007400046
NSN
국가 주식 번호:
5315-00-740-0046 5315007400046
TXT
묘사:
Headless Grooved Pin
INC
INC
아이템 이름 코드:
02386
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Oval
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.422 inches and 2.453 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.620 inches and 0.622 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
1.175 inches
MRC:
None.ABPA
Undercut Diameter:
Between 0.526 inches and 0.531 inches
MRC:
None.ABPC
Undercut Width:
Between 0.045 inches and 0.050 inches
MRC:
None.ABPD
Second Undercut Width:
0.070 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
MRC:
None.ABRC
First Hole Diameter:
Between 0.151 inches and 0.161 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
Between 0.172 inches and 0.203 inches
MRC:
None.AMCS
First End Taper Length:
Between 0.078 inches and 0.109 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
89.0 rockwell superficial 15-n and 91.0 rockwell superficial 15-n
MRC:
Indicates the location of the first end.CRDY
First End Location:
Large end
MRC:
None.CRMG
First End Taper Angle:
Between 44.0 degrees and 46.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches shank end
MRC:
None.CTTF
Second End Outer Radius:
Between 0.047 inches and 0.078 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove

{lang[cimilar]} Headless Grooved Pins

« Nails, Machine Keys and Pins {lang[catalog]}
지금 비교»
맑다 | 숨기다