TXT
묘사:
Pneumatic Tire Wheel
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.463 inches and 0.483 inches
MRC:
The measurement between specified points of the slot,in distinction from height.AAZT
Slot Depth:
Between 0.275 inches and 0.295 inches
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
1.500 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 1.964 inches and 2.058 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
9.240 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
1.500 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
6
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the ring.ACXD
Ring Style:
Rim side ring slotted
Effective Width:
7.500 inches
MRC:
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.AFFL
Mounting Bolt Circle Diameter:
Between 8.743 inches and 8.757 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2320-00-498-8377
MRC:
The length of a straight line which passes through the center of a pilot hole,and terminates at the circumference.AHEG
Pilot Hole Diameter:
Between 6.469 inches and 6.473 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the rim.AJUP
Rim Style:
Flat lock
MRC:
Indicates the design type of the item.APGF
Design Type:
Integral rim
MRC:
The physical configuration of the item.ARJD
Design Form:
Disk
MRC:
An indication of whether or not a hub is included.ASBL
Hub:
Not included
MRC:
An indication of whether or not bearings are included.AWJQ
Bearings:
Not included
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
6 stud
MRC:
An indication of whether or not a ring(s) is included.AXPR
Ring:
Included
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Single tire
MRC:
Indicates the location of the hole on the item.BFYT
Hole Location:
In center of rim
MRC:
Indicates the type of disk.BPLM
Disk Type:
Single
MRC:
The distance around the inside surface of the item.BQYZ
Inside Circumference:
Between 0.990 inches and 1.010 inches
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Included
MRC:
The physical configuration of the valve hole.CDMC
Valve Hole Shape:
Round
MRC:
The nominal length of a straight line which passes through the center of the tire rim,and terminates at the circumference.CFHQ
Tire Rim Diameter:
20.000 inches
MRC:
An indication of whether or not a tire is included.CFHR
Tire:
Not included
MRC:
Indicates the type of mounting face.CFHS
Mounting Face Type:
Convex
MRC:
The offset distance from the centerline of the rim to the outside of the wheel mounting face.CFHT
Offset Distance From Rim Centerline To Outside Wheel Mounting Face:
Between 5.125 inches and 5.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the rim.CFHY
Rim Style:
26
MRC:
Indicates the type of ring for which the item is designed.CFJF
Ring Type For Which Designed:
Side
MRC:
An indication of whether or not a bolt and/or stud mounting facility is included.CFJG
Bolt/stud Mounting Facility:
Included
MRC:
An indication of the characteristic of the hub.CFJH
Hub Characteristic:
Demountable
MRC:
The number of lightening holes provided.CNJK
Lightening Hole Quantity:
6
MRC:
An indication of whether or not a lightening hole hub cap mounting feature is included.CNJL
Lightening Hole Hub Cap Mounting Feature:
Not included
MRC:
The length of a straight line which passes through the center of a mounting facility bolt circle,and terminates at the circumference.CNSS
Mounting Facility Bolt Circle Diameter:
8.750 inches
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Vehicular
