부품 정보
Angle fin/flap seal
TXT
묘사:
Nonmetallic Angle Seal
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
L shape
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 42.245 inches and 42.275 inches
Right/base Flange Height:
0.500 inches
Left Flange Height:
Between 0.240 inches and 0.270 inches
Left Flange Thickness At Toe:
0.080 inches
Right/base Flange Thickness At Toe:
0.080 inches
Inner Radius Where Flanges Join:
0.030 inches
MRC:
The structural characteristic of the item.CQCF
Construction:
One-piece
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the left tip.CTNK
Left Tip Style:
Square end
MRC:
An indication of whether or not the right tip is identical to the left tip.CTNL
Right Tip Relationship With Left Tip:
Identical
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Ahas 40 bolt holes, 37 x 1.000 ; 1 centered 3.275 and 1 centered 1.000 : bolt hole centered .500 inch a long length and .290 inch a long height; one tip angled at .04 by 50 degrees and .03 at 45 deg
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyvinyl chloride
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm d1784 type 1 national specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Strip
