부품 정보
Second hole in grommet 0.156 in. Wide 0.312 in. Lg located on centerline 0.500 in. From intersecting centerline and first hole located on centerline 0.250 in. From intersecting centerline
TXT
묘사:
Nonmetallic Grommet
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
55.0 shore durometer a and 65.0 shore durometer a
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.125 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.125 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.375 inches
First Hole Diameter:
0.672 inches
Large Flange Outside Diameter:
2.500 inches
Small Flange Outside Diameter:
2.250 inches
Groove Outside Diameter:
2.000 inches
MRC:
Indicates the type of design used in constructing the grommet.AGMU
Grommet Construction Type:
Split
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-3065 military specification single material response and mil-std-417, type r class rs suffix a, b, f military standard single material response
