부품 정보
Chassis assembly, upper paa
TXT
묘사:
Electrical-electronic Eq Chassis
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.AAMA
Mounting Hole Diameter:
0.236 inches
MRC:
The provision/s/ for mounting the item.ABDR
Mounting Provision:
Unthreaded hole
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
8.400 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
5.800 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.190 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
7
MRC:
A measurement of the center to center distance between the mounting holes along the length.ADHV
Center To Center Distance Between Mounting Holes Along Length:
2.900 inches
MRC:
A measurement of the center to center distance between the mounting holes along the width.ADHW
Center To Center Distance Between Mounting Holes Along Width:
4.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Awg9 otps
MRC:
The number of mounting facilities provided.AKPV
Mounting Facility Quantity:
4
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Adapter
MRC:
Indicates the type and number of facilities provided for mounting the component/s/.CRQY
Component Mounting Facility Type And Quantity:
16 unthreaded hole
MRC:
A feature of the item indicating whether it is designed for optional or specific mounting of equipment.CTKP
Design Feature:
Punched holes
MRC:
Designates the size of the mounting facility.CXNK
Mounting Facility Size:
0.196
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Rectangular; with short end up, has 2 rectangular cutouts, each 3.030 in. W x 1.531 in. H, with bottom edges 1.500 in. And 3.750 in. From bottom of chassis; each cutout has a line of 4 holes 0.150 in. In dia. Above and below the cutout
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Flat
