TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.248 inches and 0.249 inches
Undercut Diameter:
Between 0.228 inches and 0.232 inches
Under Head Length:
0.866 inches
Undercut Width:
Between 0.028 inches and 0.031 inches
Second Undercut Width:
Between 0.052 inches and 0.062 inches
Second Undercut Diameter:
Between 0.208 inches and 0.218 inches
First End Taper Length:
0.031 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
55.0 rockwell c and 60.0 rockwell c
First End Taper Angle:
Between 40.0 degrees and 50.0 degrees
Pin Head Diameter:
Between 0.307 inches and 0.312 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches long shank
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.062 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1117
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
