부품 정보
Flexiblehose, internal, straight-90degreeelbow
TXT
묘사:
Nonmetallic Hose Assembly
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-2.0 degrees celsius single response and 35.0 degrees celsius single response
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.047 inches 1st end
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.047 inches 2nd end
MRC:
The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.CQBD
Burst Test Pressure:
900.0 pounds per square inch
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
225.0 pounds per square inch
MRC:
A steady,uniform,internal,static pressure that the item must withstand without leakage,abnormal distortion,or damage.CRDW
Hydrostatic Test Pressure:
450.0 pounds per square inch
MRC:
The condition of the item with respect to the texture of the inner surface.CRWL
Inside Surface Condition:
Smooth
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Endfittingsshallmatewithcpvmarkviiimaleunionbodyconnector (cage99565) ; attachmentofthehosetothefittingshallbeeitherpermanentorreusable; outerbraidshallbemadeof316stainlesssteeliawfedspecqq-s-763; endfittingsshallbemadeofinconel625iawastm-b446; tubingshallbemadeofinconel625iawastm-b446; weldandinspectiawmil-std-278, classp-1, usingmil-rn-625, iawmil-e-21562; weldacceptancecriteriatobeiawmil-std-2035, class1; afterfabrication, hoseandfittingsshallbecleanedofsmudges, weldmetal, metalchipsandmoldreleastagents, oranyothermaterialwhichmightdetractfromtheintendedoperation, functionorappearanceoftheequipment; threadsshouldhavenoevidenceofcross-threading, detrimentalmutilationorhazardousburrs; afternewitemhasbeenpressuretested, cleanwithgradebwater, conformingtonas1638, class5; aftercleaning, drywithnitrogen, conformingtobb-n-411, andcaporplugends
MRC:
Markings included on an item for the purpose of offering instructions or warnings or to indicate the purpose,function,or application of the item.excludes manufacturers part numbers,symbols,or the like.MARK
Special Markings:
Permanentcircumferentialmarkonthehoseatendofattachmentfilling, madeattimeofassembly, usedtodetermineanyslippingofthehoseinattachmentfitting, duringuse
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Air single response and water, salt single response
