TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.435 inches and 0.437 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 1.354 inches and 1.364 inches
Undercut Diameter:
Between 0.410 inches and 0.414 inches
Under Head Length:
1.449 inches
Undercut Width:
Between 0.028 inches and 0.031 inches
Second Undercut Width:
0.093 inches
Second Undercut Diameter:
Between 0.397 inches and 0.407 inches
First End Taper Length:
0.031 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
40.0 rockwell c and 45.0 rockwell c
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
0.625 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.109 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1040
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate manganese
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-p-16232 ty mcl 2 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
