부품 정보
Mil p/n m45932/2-112 insert, screw thd used for internal thd
TXT
묘사:
Spacing Threaded Standoff
MRC:
The length of a straight line which passes through the center of the groove,and terminates at the circumference.AAVZ
Groove Diameter:
0.281 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.125 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
Between 0.374 inches and 0.375 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
1.250 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.250 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
4.070 inches
MRC:
The geometric configuration of the item when viewed in cross section.ANLR
Cross-sectional Shape:
Round
MRC:
The distance from the end of the item to the center of the hole.BFKT
Distance From End To Hole Center:
2.500 inches
Distance From End To Groove:
0.344 inches
Smaller Groove Width:
Between 0.039 inches and 0.042 inches
Smaller Groove Diameter:
0.253 inches
Distance From End To Smaller Groove:
Between 0.140 inches and 0.145 inches
Hole Quantity Perpendicular To Axis:
1
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Projection and flange left internal and right external thread
