부품 정보
Keyway located on short shank 0.060 in. Wide 0.030 in. Deep
TXT
묘사:
Headless Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Square
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
Between 0.470 inches and 0.490 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
0.430 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 0.3744 inches and 0.3750 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.090 inches and 1.110 inches
First End Taper Length:
0.230 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
Second Shank Diameter:
Between 0.3744 inches and 0.3750 inches
MRC:
Indicates the location of the first end.CRDY
First End Location:
Long end
First End Taper Angle:
8.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches outside diameter
Second Shank Length:
Between 0.530 inches and 0.540 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy k-500 or nickel alloy and copper alloy and aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-286 class a federal specification 1st material response or b14h25 fscm 03538 mfr ref 2nd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
