MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
9.625 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
12.250 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
21.000 inches
MRC:
The length of a straight line which passes through the center of the cable entrance,and terminates at the circumference.AFQJ
Cable Entrance Diameter:
0.143 inches and 2.067 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
6115-00-465-1044
MRC:
Indicates the type of system in which the item is designed to be used.AGEJ
System For Which Designed:
Two wire single phase and three wire single phase and four wire three phase
MRC:
The means of attaching the item.AXGY
Mounting Method:
Unthreaded hole
MRC:
The maximum alternating current voltage rating of the main line,expressed in volts.BFYD
Main Line Maximum Ac Voltage Rating In Volts:
120.0 and 240.0
MRC:
Indicates the type and number of switches provided.BGJN
Switch Type And Quantity:
2 rotary and 1 toggle
MRC:
Indicates the type and number of entrances provided.CPLF
Entrance Type And Quantity:
2 prepunched hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular, surface mounting
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
30554-72-5000 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
