부품 정보
2 threadeded inserts installed on right end, cut out on right end with 0.062 in. Depth and a 0.312 in. Lg, machine all surfaces 125.0 microinches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.884 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.875 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
1.040 inches
Outside Edge To Bolt Hole Center Distance Along Length:
0.250 inches
Bolt Hole Centerline To Nearest Edge Distance:
0.438 inches
Smallest Bolt Hole Diameter:
Between 0.165 inches and 0.171 inches
Largest Bolt Hole Diameter:
Between 0.195 inches and 0.201 inches
Smallest Bolt Hole Quantity:
1
Largest Bolt Hole Quantity:
2
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11, temper t651 federal specification single material response or qq-a-225/8, temper t6 federal specification single material response or qq-a-200/8, temper t6511 federal specification single material response
