부품 정보
Lever throttle; 0.6 hp; 1-1/2 in. Mounted stone capacity; 2-1/2 x 1/2 in. Type 1 wheel capacity; side exhaust; 3/8-24 spindle thread; 1/4 in. Npt air inlet; 5/16 in. Hose required; 7 in. O/a lg
TXT
묘사:
Portable Pneumatic Die Grinder
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
9.0 inches
MRC:
Indicates the type of handle designed to be attached to or through an item for the purpose of opening,lifting,closing,or the like.ADQF
Handle Type:
Straight
MRC:
Indicates the type of handle designed to be attached to or through an item for the purpose of opening,lifting,closing,or the like.ADQF
Handle Type:
Body grip
MRC:
The nominal length of a straight line which passes through the center of the threaded air inlet, and terminates at the circumference.AKUM
Air Inlet Thread Diameter:
0.375 inches
MRC:
A nominal measurement of the size of the chuck.AKUP
Chuck Size:
0.250 inches
MRC:
An indication of the rated horsepower of the item.ANCY
Horsepower Rating:
1.3
MRC:
The level of a signal or sound relative to a specific distance,expressed in decibels.AQFK
Loudness Level In Decibels:
Psound pressure 88 dba
MRC:
The length of a straight line which passes through the center of the accommodation for a wheel,and terminates at the circumference.AYBY
Wheel Diameter Accommodated:
2.500 inches
MRC:
A measuremement taken at right angles to the length of the accommodation for a wheel,in distinction from thickness.AYBZ
Wheel Width Accommodated:
0.500 inches
MRC:
Indicates the type of drive end provided.BRZR
Drive End Type:
Collet chuck
MRC:
The speed at which an item can be operated under a no load condition,expressed in revolutions per minute.BRZT
No Load Speed In Rpm:
18000.0
MRC:
An indication of the drive for which the item is designed.BRZX
Drive For Which Designed:
Straight
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Lever throttle and rear exhaust
