MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Cloth and synthetic rubber, nonmetallic material
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.891 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.891 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
1.656 inches
Outside Corner Bevel Length Along Width:
0.196 inches
Outside Corner Bevel Length Along Length:
0.196 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.020 inches
MRC:
The means by which the item is lubricated.AEAH
Lubrication Method:
Impregnated
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Control, antenna
Smallest Bolt Hole Diameter:
0.147 inches
Largest Bolt Hole Diameter:
0.150 inches
Smallest Bolt Hole Quantity:
4
Largest Bolt Hole Quantity:
4
Center To Center Distance Between Smallest Bolt Holes:
1.375 inches
Center To Center Distance Between Largest Bolt Holes:
1.500 inches
Outside Edge To Largest Bolt Hole Center Distance Along Width:
0.196 inches
Outside Edge To Largest Bolt Hole Center Distance Along Length:
0.196 inches
MRC:
The chemical compound or mechanical mixture properties with which the item is lubricated.LBMA
Lubrication Material:
Rubber neoprene
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.LMDC
Lubrication Material Specification:
Ams3222 assn standard single material response
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Nas4182 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular beveled w/aperature
