부품 정보
7 inch utility grinder
TXT
묘사:
Utility Grinding Machine
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The length of a straight line which passes through the center of a spindle,and terminates at the circumference.AHDQ
Spindle Diameter:
0.625 inches
MRC:
The electrical current rating,expressed in amperes.AMPS
Current Rating In Amps:
3.4
MRC:
An indication of the rated horsepower of the item.ANCY
Horsepower Rating:
0.5
MRC:
The means used to operate the item.APHE
Operation Method:
Manual
MRC:
The source of power which drives the item.ATJK
Power Source:
Electric motor
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Bench or pedestal
MRC:
Indicates the type of spindle end on the item.BMYP
Spindle End Type:
Double
MRC:
The rated speed/s/ of the spindle,expressed in revolutions per minute.BMYR
Spindle Speed In Rpm:
3600.0
MRC:
The maximum length of a straight line which passes through the center of the accommodation for the wheel,and terminates at the circumference.BMYS
Maximum Wheel Diameter Accommodated:
7.0 inches
MRC:
The maximum measurement of the smallest dimension of a wheel the item will accommodate,in distinction from length or width.BMYT
Maximum Wheel Thickness Accommodated:
1.0 inches
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
115.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Single
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Non-exhaust type wheel guards; ga10 eyeshields furnished; length is 20.08 inches; depth is 9.15 inches; height is 10.84 inches; ul approved
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
A numeric value which represents a positive whole value without regard to any unit of measure.NMBR
Quantity:
1
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
General purpose grinding; for shaping objects and sharpening small tools; suitable for heavy grinding
