TXT
묘사:
Flexible Drive Shaft
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.940 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.150 inches
MRC:
A measurement of the longest dimension of a bushing,in distinction from width.ABXD
Bushing Length:
0.625 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
0.840 inches
MRC:
A measurement of the smallest dimension of a tongue,in distinction from length or width.AHHF
Tongue Thickness:
Any acceptable
MRC:
The element,compound,or mixture of which the shaft is fabricated.ANBM
Shaft Material:
Steel, corrosion resisting
MRC:
A designation indicating the size by which the item is commercially known and/or identified.APGG
Size Designator:
0.687 in. Dia
MRC:
Indicates the type of unit.APQB
Unit Type:
Wire wound
MRC:
Indicates the type of end.APTD
End Type:
Round, flatted one side, external
MRC:
Indicates the type of end.APTD
End Type:
Round female
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
0.375 inches diameter err-100
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
0.500 inches diameter err-100
MRC:
Designates the size of the relative or proportionate dimensions of the machined feature of the item.CFQX
Machined Feature Size:
0.250 dia, 0.380 lg; 0.156 w
MRC:
The number of threaded securing holes provided.CFQY
Threaded Securing Hole Quantity:
1
MRC:
Designates the thread diameter and number of threads per measurement scale of a securing hole.CFQZ
Securing Hole Thread Size:
No. 8 in.-32
MRC:
Indicates the location of the threaded securing hole(s) on the item.CFRB
Threaded Securing Hole Location:
0.190 in. From end, through to bore
MRC:
The length of a straight line which passes through the center of a panel bushing,and terminates at the circumference.CFRF
Err Default:
Err default
MRC:
The number of panel bushing threads per measurement scale.CFRG
Err Default:
Err default
