부품 정보
Done through hole 2.250 in. Diameter spaced 5.750 in. On axis along length and 2.750 in. On axis along the width; six thd tapped holes 0.190-32unc-2b equally spaced around hole on 2.875 in. Diameter bolt circle
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.375 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
15.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
11.500 inches
Hole Quantity Along Length:
5
Hole Quantity Along Width:
10
Distance Between Holes Along Length:
3.500 inches
Distance Between Holes Along Width:
3.500 inches
Distance From First Hole Centerline To End Along Length:
4.000 inches
Distance From First Hole Centerline To End Along Width:
4.000 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.250 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
