TXT
묘사:
Nonmetallic Bushing
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
65.0 durometer and 75.0 durometer
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.609 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
Between 0.688 inches and 0.689 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Single centrally located hole
MRC:
The length of a straight line which passes through the center of the largest end of a tapered body,and terminates at the circumference.BWRP
Tapered Body Largest Diameter:
1.062 inches
MRC:
The length of a straight line which passes through the center of the smallest end of a tapered body,and terminates at the circumference.BWRQ
Tapered Body Smallest Diameter:
1.062 inches
Longer Taper Smallest Diameter:
0.781 inches
Tapered Portion Height:
0.188 inches
Bottom Tapered Portion Height:
0.421 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber isobutylene-isoprene class iir or rubber butadiene-styrene class sbr
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-3065, type r, class rs, grade rs710bc1f1 military specification all material responses
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round tapered