부품 정보
Agt ring, seal component piston type; t-seal
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Tee intermediate ring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.379 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
0.437 inches
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
Between 0.095 inches and 0.101 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
Between 0.320 inches and 0.330 inches
Peripheral Diameter:
Between 0.388 inches and 0.402 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2840-01-114-2211, ehgine, aircraft, turbo-shaft; ah-64 apache
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Rings have scarf cut at 15 degrees plus 0 degrees or minus 3 deg
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.250 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polytetrafluoroethylene bottom ring
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polytetrafluoroethylene top ring
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber fluorosilicone class fq intermediate ring
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
(5f573)409 fvmq, 75duro, shore a, per mil-r-25988 class 3 mfr ref single material response intermediate ring