부품 정보
Arm weldment, main shaft (aft)
TXT
묘사:
Nonrotating Shaft Eye Bracket
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
3.000 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
17.902 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the inside circumference.BCXD
Bore Inside Diameter:
Between 1.516 inches and 1.518 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Item consists of sleave p/n 7009484-3 welded to plate p/n 7009484-2; sleave bore diameter 2.005 in min/2.009 in maximum with keyway 0.506 in min/0.511 in maximum x 3.000 in long x 0.219 in min/0.223 in deep, od is 3.000 in, two tapped holes in sleave 0.375-16unc-3b; item shall have tiodize type iv coating applied; weight 10.56 pounds.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm b265 assn standard 1st material response and astm b348 titanium 5111, grade 32 assn standard 2nd material response
