부품 정보
Bath water dental impression matl crs 110v 160deg f 8x3x4in
TXT
묘사:
Dental Impression Mat Water Bath
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
160.0 degrees fahrenheit
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The element,compound,or mixture of which the frame is fabricated.ADNM
Frame Material:
Steel, corrosion resisting
MRC:
The element,compound,or mixture of which the cover is fabricated.AFFA
Cover Material:
Steel, corrosion resisting
MRC:
The minimum and maximum limits of temperature at which the item is rated for operation.AFGA
Operating Tempurature Range:
+100.0/+160.0 degrees fahrenheit
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the frame surface.ALBX
Frame Surface Treatment:
Any acceptable
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
110.0 volts
MRC:
An indication of whether or not a thermostatic control is included.ASDG
Thermostatic Control:
Included
MRC:
Indicates the type of temperature control device provided.AZFX
Tempurature Control Device Type:
Variable
MRC:
Indicates the type of heating element provided.BDXJ
Heating Element Type:
Electric nonimmersion
MRC:
The number of thermometers on the item.BHGW
Thermometer Quantity:
1
MRC:
The element,compound,or mixture of which the basin is fabricated,excluding any surface treatment.BJML
Err Default:
Err default
MRC:
The design of the heating element.CPGF
Err Default:
Err default
MRC:
The number of heating element switch positions provided.CPGG
Err Default:
Err default
MRC:
An overall measurement between specified points on a basin,in distinction from height.CPGL
Err Default:
Err default
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the basin.CPGM
Err Default:
Err default
MRC:
An overall measurement taken at right angles to the length of a basin,in distinction from thickness.CPPP
Err Default:
Err default
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Used where medium heat is required entire unit constructed of 18-8 nickle bearing stainless steel. Water receptacle is sealed below rim to prevent accidental spillage penetrating to nside. Disposable tank liners (part 36-7120) available
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Silver
MRC:
The physical configuration of the item.SHPE
Shape:
Rectangular
