부품 정보
70 series heavy duty caster 675 lb capacity; nimrod 2000
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Nimrod mra4; air reconaissance
MRC:
The number of wheels included on the item.AGDH
Wheel Quantity:
1
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Rubber wheel rim and steel frame
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Zinc plated body
MRC:
Indicates the type of wheel/s/ provided on the item.AYMR
Wheel Type:
Solid
MRC:
The length of a straight line which passes through the center of the wheel,and terminates at the circumference.BCDX
Wheel Diameter:
6.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the plate.CBZT
Plate Style:
Square
MRC:
A measurement taken at right angles to the length of the tread,in distinction from thickness.CCBH
Tread Width:
3.000 inches
Caster Plate Length:
7.250 inches
Caster Plate Width:
5.250 inches
Center To Center Major Distance Between Mounting Slots Along Length:
6.125 inches
Center To Center Major Distance Between Mounting Slots Along Width:
4.125 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Swivel lock factory installed
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Swivel offset
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Grade 4 kingbolt is heat treated and features a slotted adjusting nut; 0.750 in. Axle; pre-lubricated before shipping; swivel section made from hot forged c-1045 steel with 4 in. Diameter load racewaqy and 0.5 in. Dia. Ball bearings; legs: 0.375 in. X 3.00 in. Steel, continuously welded inside and outside to the yoke base
