부품 정보
Spline data: base dia.=0.54127; class of fit=5; major dia.=0.713; minordia.=0.570; pin dia.=0.108; form dia.=0.692; gear a data: agma quality no.=8; teeth no.=40; diametral pitch=10.160; pressure angle=20 deg.; tooth form=involute; pitch dia.=3.937; root dia.=3696; gear b data: agma quality no.=8; teeth no.=25; diametral pitch=6.350; pressure angle=20 deg.; tooth form=involute; pitch dia.=3.937; root dia.
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
10 both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Involute spline both ends
MRC:
Indicates the design type of the item.APGF
Design Type:
Spur all gears
MRC:
A measurement of the spline pitch diameter.BDTX
Spline Pitch Diameter:
0.5000 inches both ends
MRC:
The structural characteristic of the item.CQCF
Construction:
Assembled
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
36.0 rockwell c or 40.0 rockwell c
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
4.134 inches first gear
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
4.252 inches second gear
MRC:
The quality designation of an item as determined by industry,association,or manufacturer standards.CWWK
Precision Classification:
Quality number 6 all gears
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type iii military specification single treatment response
