TXT
묘사:
Union Thread Piece
MRC:
The industrial designation or term used to define the diameter of pipe.AAGN
Pipe Size Designation:
0.500 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.313 inches
MRC:
A numeric value that reflects the hardness of the material when used in conjunction with a hardness rating scale.ALME
Material Hardness Rating:
Not rated
MRC:
The load in tension applied in a longitudinal direction or the load that can be applied in a plane perpendicular to the axial centerline without rupture or permanent deformation of the material.AWQD
Strength Rating:
Not rated
MRC:
Indicates the type of end connection.AWZY
End Connection Type:
Welded
MRC:
Indicates the type of seat provided.BYJF
Seat Type:
Straight face
MRC:
A measurement of the working pressure and the type of service for which rated.CDPG
Working Pressure And Service Type:
6000.0 pounds per square inch air err-100 err-100
MRC:
A measurement of the working pressure and the type of service for which rated.CDPG
Working Pressure And Service Type:
6000.0 pounds per square inch gas err-100 err-100
MRC:
A measurement of the working pressure and the type of service for which rated.CDPG
Working Pressure And Service Type:
6000.0 pounds per square inch oil err-100 err-100
MRC:
A measurement of the working pressure and the type of service for which rated.CDPG
Working Pressure And Service Type:
6000.0 pounds per square inch water err-100 err-100
MRC:
An indication of whether or not a male end feature is included.CGNC
Male End Feature:
Not included
MRC:
Designates the union end thread diameter and number of threads per measurement scale.CGND
Union End Thread Size:
1-3/4-12
MRC:
A designation distinguishing one group of union end screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CGNF
Union End Screw Thread Series Designator:
Un
MRC:
The direction of the union end thread when viewed axially.CGNG
Union End Thread Direction:
Right-hand
MRC:
An indication of whether or not a bulkhead feature is provided.CGNH
Bulkhead Feature:
Not provided
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, federal standard 66, comp 1018
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1018
