부품 정보
Counterbored 1.375 in. Diameter by 0.093 in. Deep largest diameter of hub; counter bored 1.125 in. Diameter by 0.093 in. Deep smallest end of hub; 2 thd holes 3/8 in.-16 nc top located 2.750 in. Ctoc same center line w/keyway; bore tappered 1-1/2 in. Per ft
TXT
묘사:
Centrifugal Pump Impeller
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.937 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
Between 0.188 inches and 0.190 inches
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
Between 0.091 inches and 0.097 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
Between 6.477 inches and 6.480 inches
MRC:
The number of keyways contained in or on the item.AEVE
Keyway Quantity:
1
MRC:
A measurement of the longest dimension of a keyway,in distinction from width.AFYS
Keyway Length:
1.750 inches
MRC:
The number of individual blades included.AJLB
Blade Quantity:
8
MRC:
A measurement of the longest dimension of the hub,in distinction from width.AJLJ
Hub Length:
1.750 inches
MRC:
Indicates the type of blade provided.ANCT
Blade Type:
Forward curve
MRC:
Indicates the design type of the item.APGF
Design Type:
Single width
MRC:
The means of attaching the item.AXGY
Mounting Method:
Key
MRC:
The direction of rotation for which the item is designed.AYSY
Rotation Direction For Which Designed:
Counterclockwise
MRC:
The length of a straight line which passes through the center of a circular hub bore,and terminates at the circumference.BDDS
Hub Bore Diameter:
0.853 inches
MRC:
The length of a straight line which passes through the center of a circular hub bore,and terminates at the circumference.BDDS
Hub Bore Diameter:
1.137 inches
MRC:
Indicates the location of the hub on the item.BDJW
Hub Location:
Single inside offset
MRC:
The number of hubs provided.BLKK
Hub Quantity:
1
MRC:
A measurement of the longest dimension of the hub projection beyond the wheel side,in distinction from width.CPWW
Hub Projection Length Beyond Wheel Side:
0.218 inches
MRC:
Indicates the type of keyway provided.CPWX
Keyway Type:
Woodruff
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Bronze
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Water pump, engine cooling system components, nonaircraft
