부품 정보
Flywheel housing is sae 2- aluminum
MRC:
The number of cylinders incorporated in the item.AAXZ
Cylinder Quantity:
6
MRC:
The length of a straight line which passes through the center of the cylinder /engine,compressor,or the like/,and terminates at the inside diameter.ACXZ
Standard Bore Diameter:
4.490 inches
MRC:
The cooling medium used to maintain the required operating temperature of the item.ACZV
Cooling Medium:
Liquid
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
R-11 fuel truck
MRC:
An indication of whether or not a feature is included for the item to be operated in a specified depth of water without malfunction.AGEB
Fording Feature:
Not included
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
Air compressor plumbing; air compressor inlet; air compressor; heater; vibration damper; alternator mounting hardware; front gear train accessory drive adapter; front engine support; fan drive arrangement; fuel filter/water seperator (single spin-on); fuel lift pump; 12 volt fuel shut-off valve; flexplate for allison mt654 w/integral spacer; lifting arrangement; dipstick arrangement; oil fill location; rear sump oil pan; starter spacer; cummins beige paint; turbocharger location
MRC:
The arrangement of the cylinders.AWXE
Cylinder Arrangement:
Straight in-line
MRC:
The measured distance of the stroke.AWXF
Stroke Length:
5.320 inches
MRC:
The number of strokes required to complete one cycle.AXCQ
Strokes Per Cycle:
4
MRC:
The power delivered by the item at specified revolutions per minute.AXCW
Brake Horsepower At Specificationified Rpm:
250 bhp at 2200 rpm
MRC:
An indication of whether or not a direct raw water cooling feature is included.AXCZ
Direct Raw Water Cooling Feature:
Included
MRC:
An indication of whether or not a closed system hull cooling feature is included.AXDA
Closed System Hull Cooling Feature:
Not included
MRC:
Indicates the type of piston action provided.AXDD
Piston Action Type:
Single acting
MRC:
An indication of whether or not a multifuel usage feature is provided.AXDF
Multifuel Usage Feature:
Not provided
MRC:
The crankshaft rotation direction viewed from and facing the main driving end.AXDK
Crankshaft Rotation Direction:
Clockwise
MRC:
An indication of whether or not a direct reversible feature is included.AXDN
Direct Reversible Feature:
Not included
MRC:
The means used to start the item.AXDP
Starting Method:
Electrical
MRC:
An indication of whether or not a supercharger is included.AXDR
Supercharger:
Included
MRC:
An indication of whether or not a flywheel is included.AXDS
Flywheel:
Included
MRC:
An indication of whether or not the flywheel housing is included.AXDT
Flywheel Housing:
Included
MRC:
An indication of whether or not a reduction gear is included.AXDW
Reduction Gear:
Not included
MRC:
An indication of whether or not a fluid coupling is included.AXJA
Fluid Coupling:
Included
MRC:
An indication of whether or not a transmission is included.AXJB
Transmission:
Not included
MRC:
An indication of whether or not a clutch is included.AXJL
Clutch:
Not included
MRC:
An indication of whether or not a starter is included.AYPC
Starter:
Not included
MRC:
Literature and references available for information pertaining to the item.RDAL
Reference Data And Literature:
To. 36a12-13-17-84
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
15434-4514 standard (includes industry or association standards, individual manufactureer standards, etc.).
MRC:
The alpha-numeric-alpha designation used to identify the type and/or model of the basic item.TMDN
Type/model Designation:
6cta8.3
