부품 정보
Bolt, w/lock washer
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
Between 0.3287 inches and 0.3331 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
0.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon extended washer
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.308 inches and 0.324 inches
Width Between Flats:
Between 0.5510 inches and 0.5625 inches
Extended Washer Diameter:
Between 0.640 inches and 0.654 inches
Extended Washer Thickness:
0.035 inches
MRC:
The number of washers included on the item.AAVW
Washer Quantity:
1
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Mrap - common nsn - used on maxxpro cat i and 3 other weapon systems
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Mrap
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.3750 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
16
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
40.0 rockwell c and 50.0 rockwell c primary washer
Primary Washer Outside Diameter:
Between 0.640 inches and 0.654 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the primary washer.CTHW
Primary Washer Style:
Flat external teeth
Primary Washer Material Thickness:
0.035 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Material: bolt-grade 5 steel, washer-steel 1050
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc
