부품 정보
Head threaded 2-12unc-2a; first end threaded 3/4-10unc-3a
TXT
묘사:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Double chamfer
Under Head Length:
4.450 inches
First Step Diameter:
1.500 inches
First Step Length:
3.455 inches
Second Step Diameter:
0.750 inches
Second Step Length:
0.995 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
First Hole Diameter:
0.500 inches
Second Hole Diameter:
0.500 inches
Distance From Centerline Of Hole To End Of Pin:
1.380 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
1.325 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Dashpot, 2.746/2.748 diameter sub-assembly hydraulic cylinder
First End Taper Length:
Between 0.040 inches and 0.060 inches
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
2.000 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
1.000 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy k-500 or nickel alloy 502
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-286, class a or class b federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
