MRC:
The industrial designation or term used to define the diameter of pipe.AAGN
Pipe Size Designation:
0.250 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.062 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.250 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the outside circumference.AHTC
Flange Outside Diameter:
1.062 inches
MRC:
The load in tension applied in a longitudinal direction or the load that can be applied in a plane perpendicular to the axial centerline without rupture or permanent deformation of the material.AWQD
Strength Rating:
45000.0 pounds per square inch tensile and 18000.0 pounds per square inch yield
MRC:
Indicates the type of end connection.AWZY
End Connection Type:
Welded
MRC:
Indicates the type of seat provided.BYJF
Seat Type:
Straight face
MRC:
A measurement of the working pressure and the type of service for which rated.CDPG
Working Pressure And Service Type:
6000.0 pounds per square inch oil and 6000.0 pounds per square inch gas and 6000.0 pounds per square inch water
MRC:
An indication of whether or not a male end feature is included.CGNC
Male End Feature:
Not included
MRC:
An indication of whether or not a nut retaining flange is included.CGNJ
Nut Retaining Flange:
Included
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Zzzy
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Copper alloy, mil-c-15726, comp 70-30
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 715
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
Material controlled iaw navsea 0948-lp-045-7010 material control standard for level i items
