MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
0.061 inches
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.189 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 0.428 inches and 0.430 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.650 inches and 0.670 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.650 inches and 0.670 inches
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
0.350 inches
MRC:
The length of a straight line which passes through the center of a rod connection bore,and terminates at the circumference.AKYC
Rod Connection Bore Diameter:
Between 0.281 inches and 0.296 inches
MRC:
The distance measured along a straight line parallel to the longitudinal axis which establishes the acceptable depth of the rod connection bore.AKYG
Rod Connection Bore Depth:
Between 0.890 inches and 0.930 inches
Distance From Pivot Pinhole Center To Rod Connection End:
Between 1.870 inches and 1.890 inches
Fork Arm Thickness:
0.090 mils and 0.110 centimeters
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
Between 1.240 inches and 1.260 inches
Distance From Pivot Pinhole Center To Fork End:
Between 0.240 inches and 0.260 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140 or steel comp 8740
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-5626 military specification 1st material response or mil-s-6049 military specification 2nd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Clevis
